9738 - dSCR STACKER
The dSCR Stacker is the perfect solution to upgrade an old single satellite STB system to an dSCR-compatible dual input receiver (PVR) or 2 separate dSCR-compatible set-top boxes. The advantage of using the 9738 is that no additional cable is needed to connect the second tuner. The product stacks both transponders on 1 cable.
- application:
- 1 Twin LNB
- 2 ports of a multiswitch
- 2 Twin LNBs connected to Multiswitch (ref. 9920)
- powers the LNB or multiswitch from the STB or from an additional power supply
- power with Ref. 2460 Power Supply
- supports the following standards:
- EN50494/SCR standard (DiSEqC 1.0)
- EN50607/dCSS/dSCR standard (DiSEqC 2.0)
9738 |
||
Inputs |
- |
2 ports Satellite, combined with Terrestrial on port 1 |
Input Frequency |
MHz |
Userbands 1-2: 1076 - 1178 MHz |
STB Output Frequency |
MHz |
5 – 862 / 950 – 2150 |
dCSS/dSCR outputs |
- |
1 SCR |
dCSS/dSCR output connector |
Ohm |
75 F type (Female) |
dCSS/dSCR UBs |
- |
2 on SCR output |
dCSS/dSCR output level |
dBm |
-23 |
Satellite input power level |
dBm |
-45 to -15 |
Return loss |
dB |
>=8 (Typ 12) |
Tap loss SCR |
dB |
Not applicable, AGC (automatic Gain control) |
Terrestrial/Cable loss |
dB |
-7 typical |
Band and polarity selection |
- |
DiSEqC 1.0 (unidirectional) DiSEqC 2.0 (bidirectional) Standard EN 50494 (SCD) Standard EN 50607 (SCD 2) |
Max DC current consumption SCR port |
W |
<4,0 |
DC power pass from STB to input ports |
V |
13/18/22kHz 100mA max per port |
From DC power port to input ports |
V |
13/18/22kHz 500mA max combined |
Power supply |
- |
From STB or power inserter |
Power (2460 available separately) |
A |
500mA max, 20V |
Dimensions |
mm |
90x85x40 |
Dimensions of product (mm): | |
Product(s) per box: | |
Dimensions of box (mm): | |
Product weight (kg): | |
EAN-13 code product: | 2097390000015 |
Products per cardboard: | |
Cardboard dimensions (mm): | |
Cardboard weight (kg): | |
EAN-13 code packaging: | 2597340000909 |
Products per pallet: |