5510 - PROCAT
previous - next
The ProCAT is your professional digital modular headend for cable and terrestrial signals.
PERFECT PICTURE QUALITY OF DEMODULATED TRANSPONDERS ON IP OR COAX
- Receives 1 transponder from any DVB source (terrestrial or cable)
- Decrypts the PayTV channels, when a professional CAM is inserted
- Compatible with SD and HD, with MPEG2 and MPEG4
- Plug&Play thanks to a built-in WebGUI
- Configure remotely with uCloud via the RMU (ref. 5951)
| Input | ||
|---|---|---|
| Number of inputs | - | 1 with passive loop-through (-2dB) |
| Tuner | - | 1 |
| Frequency range | MHz | 47 - 1002 |
| Standard | - | DVB-T/T2 DVB-C |
| DC remote power for LNA | V mA |
12 or 24 350 |
| Input level | dBµV dBm |
50 to 99 -59 to -10 |
| Loop-through loss | dB | 1.5 |
| Return loss | dB | 8 |
| Bandwidth | MHz | 8, 7, 6 switchable |
| RF Output | ||
| Number of outputs | - | 1 RF with passive loop-through (-2 dB) |
| Multiplex | - | 1 |
| Frequency range | MHz | 174 - 862 |
| Output level | dBµV | 69 to 84 (adjustable) |
| Standard | - | DVB-T ISDB-T |
| Modulation error rate (MER) | dB | 40 |
| Ethernet Output | ||
| Number of outputs | - | 1 Gb Ethernet |
| Standard | - | IEEE 802.3ab 10/100/1000 Base-T |
| Protocol | - | Multicast IP/UDP |
| General | ||
| CI slot | - | 1 |
| Input voltage | VDC | 15 |
| Power consumption | W | 6 |
| Operating temperature | °C | 0 to +50 |
| Dimensions | mm | 5 RU x 8 TE x 367 mm |
| Weight | kg | 1.1 |
| Accessories | - | 2 x RF bridge, 2 x DC bridge |
| Dimensions of product (mm): | |
| Product(s) per box: | |
| Dimensions of box (mm): | |
| Product weight (kg): | |
| EAN-13 code product: | |
| Products per cardboard: | |
| Cardboard dimensions (mm): | |
| Cardboard weight (kg): | |
| EAN-13 code packaging: | - |
| Products per pallet: |
- Which LNB is suitable?
- The WebGUI is slow
- I’ve lost my username or password for the login
- The channel numbers on the TV’s are not arranged correctly
- I cannot find my module
- Do I need a multiswitch when using a universal LNB
- I get the message current overload/CAM overflow
- I have set my module IP address to a fixed address and don’t remember the IP address nor the hostname of this device
- What is the meaning of the MPEG settings?
- I don’t see the interface of the WebGUI (or only the language box)
- I cannot tune to any transponder
- I installed the system, but all TV’s remain black (no images)
- How do I set up a remote access to the installation
- I don’t have my EPG data, and I did enable the EPG option
- How do I use the DiSEqC® settings
- For my encoded channels, I have a green lock symbol in the webGUI (or UUI), but still I have no image:
- I have lip sync issues
- I was configuring a certain module, then disconnected the cable and connected another module, but I cannot access that module
- The LNB’s are not powered
- When I scan for channels on the TV I can’t find the complete list (NIT settings, TSID settings,…)
- I get the message “module is too hot”
- I use an older pc, that does not support MDIX
- I have a warning message telling me to switch to another browser every time I change the page in the webGUI
- When I look for a module I get response from a random one, I’m looking for a specific module
previous - next
